Contact Us
-
No. 186, Zhangshui Rd., Changhua City, Changhua County 500031, Taiwan (R.O.C.) -
-
Fax Telephone+886-4-7611920 -
D-U-N-S Number®656095189
Application
Bicycle Main Forging Parts
Automobile Sheet Metal
Automotive Parts
TFT-LCD Panels
New Energy
The G2 series punch press is designed for structural optimization, significantly enhancing the precision of stamped products and effectively extending the lifespan of dies. It features an integrated welded frame that eliminates internal stress, providing a highly rigid punch press.
| Standard Accessories | |
| Fixed dual-button control station | 6-digit stroke counter |
|
Programmable Logic Controller (single PLC) with HMI interface
|
6-digit pre-set counter |
|
Operation mode selection Cut / Inch / Safe Single Stroke / Continuous |
4-digit maintenance counter (unit: ten thousand) |
| Hydraulic overload protection device | 10-digit life counter |
| Second-stroke protection device | 3-digit cutting counter (can be changed to air blowing device) |
| Electrical cabinet door power-off switch | Electronic cam switch (with 6 positions reserved) |
| Dual-channel solenoid valve | Air blowing device 3/8" (one circuit) |
| Reserved photoelectric safety device circuit | Misfeed detection socket (two circuits) |
| Power socket (customer-supplied power) | Electric slide adjustment device |
| Digital die height indicator (unit: 0.1mm) | Inverter and main motor reverse device |
| Manual grease lubrication device | |
| Optional Accessories | |
| Die cushion device |
Flywheel brake device |
| Photoelectric safety device |
Feed shaft end ● Crankshaft front-end extension type ● Left side take-off type |
| Top material feeding device for slide | Quick Die Change System (Q.D.C.) |
| T-type worktable | Foundation screws and foundation plate |
| Safety blocks and safety pins | Anti-vibration rubber pad |
| Attached misfeed dual-channel solenoid valve | Anti-vibration mechanical feet |
| Cutting counter 3 digits | Die illumination light |
